TV160 LVDS LED LCD TV Motherboard Tester (7th Gen)

TKDMR  TV160 LVDS LED LCD TV Motherboard Tester

In the process of LCD TV repair or production, the motherboard needs to be connected to the screen test, but the motherboard has many models and needs to be repaired or produced with different screens.

Based on this consideration, the converter can directly convert the LVDS signal sent by the main board into a VGA output, which can reduce the pressure of the universal test screen, and can also prevent the phenomenon that the screen body is burned due to abnormality of the motherboard fault output signal.

More importantly, the converter itself has a 7-inch display, which is convenient for engineers to carry test TV motherboards. Its use value is very high!

 

Instructions for use:

    1. First connect the motherboard to the screen line conversion board, pay attention to the correct line order, turn on the TV motherboard, and the indicator of the screen line conversion board is bright, indicating that the motherboard and the screen board are connected correctly, otherwise check again.

    2. When the screen conversion board and the motherboard are connected correctly, the screen conversion board is facing up and inserted into the LVDS converter.TV board and the converter are all turned on.

    3. When the image display is not normal, press the mode switch button repeatedly to switch between different modes. Until the image is normal.

4, the converter supports 60Hz, 120Hz, 240Hz various LVDS formats, such as two screen line motherboards, only need to connect a main screen line to the HD conversion board, another screen line does not need to connect, you can also switch to The image you need.

Demonstration of the transfer of the screen line conversion board to the converter:

The TV motherboard is connected to the converter to the display, the effect is really good!

The 6th generation converter can be directly powered by mobile power: the actual measurement is powered by a 10400-capacity mobile power supply, which can be powered for 15 hours. It can meet the carrying test. You can make the power supply line yourself and use other mobile power supplies.

TV60-7 generation converter product:

1, equipped with 7-inch high-definition (1024 * 600) display can be directly displayed on the motherboard images sent at the same time output 1080P / 60Hz HDMI can be directly connected to the external display or TV;

2, support for 2K television products, single and double line of 60Hz, 120Hz, 240Hz resolution LVDS signals;

3, support 4K TV products V-by-One (including 4, 8, 16) signal conversion into full-screen output, compatible;

4, Automatic recognition LVDS, V-by-One signal, through the key to LVDS (2K mode), V-by-One (4K mode) cycle switching;

5, wide power input design, support 5V-12V adapter (recommended 5-6V / 2A or more current power adapter).

6, the converter not only supports 8bit \ 10bit VASA, JEIDA and other formats of LVDS signals, also supports 60Hz, 120Hz, 240Hz single-screen and dual-screen line LVDS signals to support 4, 8, 16 V- by-One (30/60 / 120Hz) signal, compatible with all LVDS, V-by-One signal movement motherboards. The converter also comes with 7-inch screen display, home test board more convenient, well received by the maintenance, maintenance engineers no longer have to worry about the lack of testing, aging screen tooling problems. For the factory production test, it outputs 1080P HDMI format signals, direct external display and TV display, display resolution higher.

7, built-in input interface protection circuit, even if the screen into the power, it will not burn the converter, unlike other brand converter to engage in a lot of protection small board so much trouble, the product is more convenient to use.