XH-W1219 Temperature Controller Switch Module Dual LED Digital Display (ডিম ফুটানোর মেশিন )

৳ 300.00

In stock

SKU: 8369 Categories: ,

XH-W1219 Temperature Controller Switch Module Dual LED Digital Display in Bangladesh

XH-W1219 DC 12V Thermostat Temperature Controller Switch Dual LED Digital Display + Waterproof NTC Sensor Module for Incubator

ডিম ফুটানোর মেশিন হিসেবে ব্যাবহার করা যায়

This is XH-W1219 12V Digital Red+Green Display Temperature Controller Module W/ NTC Waterproof Temperature Sensor. The XH-W1219 thermostat module with its STM8S µC and I/O (sensor input, keys, double display, relay) can be re-programmed for automation tasks, and it’s easy to work with.

Digital thermostat module. The temperature controller/switch with waterproof NTC probe and integrated LED display in red and green.

 

Description: W1219 12V Digital Red+Green Display Temperature Controller Module W/ NTC Waterproof Temperature Sensor

Features:

  • Control Range: -50~110 °C
  • Control Precision: 0.1 °C
  • Measuring Input: NTC10K waterproof sensor L=0.5m.
  • High-Temperature Alarm: -49~110 °C
  • Input Voltage: DC 12V
  • Output Type: Relay output 10A (max)
  • Return Difference Setting: 0.1~30 °C
  • Delay Starting: 0-10min
  • Temperature Calibration: -10~10 °C

Parameter:

Model: XH-W1219
Control range: -50°C to 110°C
Control accuracy: 0.1°C
Measurement input: NTC10K waterproof sensor L=0.5M
High temperature alarm: -49°C to 110°C
Input voltage: DC 12V
Output type: relay output up to 10A
Return difference setting: 0.1°C to 30°C
Delayed start: 0-10 minutes
Temperature correction: -10°C to +10°C
Size: 60*43*16mm (length*width*height)

How to restore factory settings:

Under normal power, press and hold the + and – key for about three seconds to restore factory settings.
1. PO temperature control mode:
This value must be set when the thermostat is used for the first time. If it is used for heating, it must be set to H. If it is used for cooling, it should be set to C.
2. P1 difference setting:
Press the SET button for a long time to enter the internal settings, select the P1 setting, and then press the SET button again to set the hysteresis value. (The hysteresis is the difference needed when the thermostat reaches the set temperature and stops working again.)
3. P2 temperature calibration:
This function is used for temperature calibration. If there is a deviation between the detected temperature and the actual temperature, this function can be used to correct. The corrected value = measured value + correction value. (If you do not control the compressor or do not need delay function, skip this item directly)
4. P4 high temperature alarm:
Set the high temperature alarm value. When the real-time temperature exceeds this value, the screen will flash warning alarm.

Package Included:

1 X XH-W1219 dual display digital temperature controller
Be the first to review “XH-W1219 Temperature Controller Switch Module Dual LED Digital Display (ডিম ফুটানোর মেশিন )”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Main Menu